SIGA -DH - Edwards Signaling & Security Systems SIGA-DH Systems - Intelligent Duct...
Request Quote
For Price
- Part Number:
- SIGA -DH
- Model Number:
- SIGA -DH
- Make:
- EDWARDS SIGNALING
- Lead Time:
- Available
- Qty In Stock:
- Available
Edwards Signaling & Security Systems SIGA-DH Systems - Intelligent Duct Smoke Detector Housing 85001-0325 Simple Type: System
The SIGA-DH Duct Smoke Detector Housing is specially engineered to exploit all the capabilities of Signature Series intelligent photoelectric and multisensor smoke detectors. Edwards Signature Series detectors gather analog information from each of their one or more sensing elements and converts it into digital signals. The detector’s onboard microprocessor measures and analyzes these signals. It compares them to historical readings, time patterns and known characteristics to make an alarm decision. Digital filters and complex Algorithms are applied for optimum detector accuracy. Unwanted alarms are virtually eliminated.
For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.
Features
- Designed and manufactured to ISO 9001 standards
- Designed for use with standard 4D, 3D, and Photoelectric
- Detector plugs-in to base then easily installs into housing.
- duct smoke heads.
- Install in ducts up to 10 ft. (3.05 m) wide
- Remote LED and test station accessories
- Signature Series smoke detectors. Does not require “special”
- Standard Signature Series detectors
- Standard, relay, or isolator detector base
- Suitable for high air velocity duct applications
- Up to 4000 ft/min. (20.3 m/sec.) with Photoelectric Detector.
Specifications
- Addressing Restrictions: Uses one Input Device Address
- Agency Approvals: UL, ULC, MEA, CSFM
- Compatible Mounting Bases: SIGA-SB Standard Base, SIGA-RB Relay Base, SIGA-IB Isolator Base
- Compatible Remote LED: SIGA-LED (LED flashes when in alarm)
- Conduit Knockouts: Combination 1/2 inch & 3/4 inch
- Controller Compatibility: SIGNATURE Loop Controller
- Dimensions: 7-3/8 inches (188mm) W x 7 inches (178mm) H x 5 inches (127mm) D
- Electrical, Physical Characteristics: Refer to individual detector catalog sheets
- Material and Finish: 16 Gauge Cold Rolled Steel, Red - Baked Enamel
- Pre-alarm Sensitivity: 5 % increments, allowing up to 20 pre-alarm settings
- User Selected Sensitivity Settings: Least Sensitive: 3.5%; Less Sensitive: 3.0%; Normal: 2.5%; More Sensitive: 2.0%; Most Sensitive: 1.0%
Applications
- None Available
Aliases
- None Available